1. From the main screen, Hold down on F2 and F4 at the same time.
2.Key in the password located in the load file in Vericentre and press the green enter key.
3. Scroll down using the purple button on the far left below the down arrow.
4.Select "Memory Functions".
5.Select "Clear Mem".
6.Press enter on the "Group ID 1" screen and enter the password if prompted.
7.Scroll down using the down arrow on the far left and select "Clear all Groups" then choose "Confirm"(the terminal may become unresponsive for a few moments).
8.Press the Red X key over and over(about 5 times) until it will not go any further and download is an option on the screen.
9.Select "Download" by pressing the number 2:
10.Enter the Group ID # 1(if not already listed) and press the green "Enter" key.
11.Enter the password again(The same password located in the load file in Vericentre).
12.Select 2 for "Single-app".
13.Select 1 for "Partial Download".
14. Choose continue to erase the applications from GID 1, then choose continue again to erase the applications from GID 4(if prompted).
15.Scroll down to #3 for TCPIP.
16.Press the green Enter key for Download.
17.Scroll down to select "Ethernet"using the 2nd purple key from the left.
18.Press the green Enter key for Download.
19.Make sure that the URL/Address is: TERMINALS.FORTE.NET. If not, edit it using the purple key on the right.
20.Make sure that the port is 443. If not, edit it using the purple key on the right.
21.Make sure that SSL is False.
22.Make sure that the block size is "empty".
23.Make sure that the heap size is "4096".
24.Make sure that the terminal ID is correct and matches the one in Vericentre.
25.Edit the application name by pressing the purple button on the right. You will want to clear out the current application(using the yellow key) and enter VVMAC263. Enter letters by pressing the number key associated with the letter and then pressing the "Alpha" key to change the number to letters.
26.Press the enter key over and over until you see the download, please wait screen.
27. After you have downloaded the VVMAC263 application. Repeat steps 9-26 to download the following 2 applications: XCSB1F543 and EMAX602.
Then you will do an EMA update to download the remaining applications.